OCPP Charging
The simulator runs a charging pile that connects to the OCPP platform, sends its heartbeats, and reports itself as available. Plug a vehicle in here and the platform can start a charge; the charge itself is started and stopped from the platform.
Charge points
| Charge point | Connection | OCPP status | Vehicle | Transaction | SoC | Power (kW) | Energy (kWh, session) | Last heartbeat | Plug |
|---|---|---|---|---|---|---|---|---|---|
|
CP-001
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:24Z | |
|
CP-002
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:24Z | |
|
CP-003
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:24Z | |
|
CP-004
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:24Z | |
|
CP-005
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:25Z | |
|
CP-006
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:24Z | |
|
CP-007
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:24Z | |
|
CP-008
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:25Z | |
|
CP-009
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:25Z | |
|
CP-010
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:24Z | |
|
CP-011
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:24Z | |
|
CP-012
connector 1
|
connected | Available |
Unplugged
GESS123
|
— | 40.0 % | 0.00 kW | 0.000 kWh | 2026-10-25T21:10:25Z |
Refreshing every 3 s. Last read: just now.
How a charge runs
Available
→
plug in vehicle
→
Preparing
→
platform starts the charge
→
Charging
→
platform stops it
→
Available, no vehicle
- The pile connects and reports Available, over ws://ocpp-backend:9000/ocpp/CP-001, and repeats that every heartbeat.
- Plug in vehicle puts a vehicle on the connector, which a platform reads as Preparing before it offers a charge. Nothing is charging yet.
- The platform sends RemoteStartTransaction; the charger authorises the id tag, opens the transaction and reports Charging with meter values.
- When the platform sends RemoteStopTransaction, the charger closes the transaction, reports Finishing and then Available, and clears the vehicle — so the pile is back to its initial condition without anyone touching this page.